Guided process to easily create parametric planar, simple or 3D complex Coils

Supplement the existing Mechanical feature of"Solution Combination" by offering spreadsheet based load case combination

Allow to automatically create a 3D step-skewed electrical machine. One can set either same skew angles and height for each slice or use equal parameters for each slice. Only need is 2D Maxwell Design and to fill the parameters of future machine

Create an Envelope of Max/Min Stresses over all the time steps (substeps). User can either scope it to all the time steps or scope to certain time window.

Compute Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD) from the solution data and create a report containing the maximum and minimum values of PMV and PPD in the computational domain along with contour of PMV and PPD at different sections across the computation

This wizard allows predicting distortion in components during and after a thermal cut process

Easily calculate an average temperature or a surface thermal power output in a thermal analysis

This App calculates LCF/TMF life (based on BAM damage model) of a component operating at high temperature changes in its operational time. . The life is calculated based on accumulated damage.

Set up a 2D axisymmetric tire model in the Mechanical. Perform 2D analyses, Map2dto3d and further 3D analyses like Footprint and Steady State Rolling etc., however everything in a 2D static structural analysis system.

Automatically output three dimensional topographic maps in an STL file format. SRTM data are used to create the maps

Twin Builder component library of Toshiba devices

Enable Ansys Workbench to automatically send emails after completing updates of components/systems/design points in Workbench projects