Post processing tool to evaluate maximum stress or strain range from a selected range of solution steps or a Solution Combination. Results are saved in a csv file for external fatigue analysis and plotting using "CSV Plot".

Expose nCode DesignLife in Mechanical allowing the user to perform fatigue analysis.

SDC Verifier module which enables fatigue calculations in Ansys Mechanical according to Eurocode3, DNV-RP-C203, FEM 1.001, EN13001 and DIN 15018 standards.

Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001, DNV C203 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate & Stiffener Buckling); AISC 89/360-10, API RP-2A WSD and LRFD, ISO 19902, Norsok N004 (Offshore). Advanced report generator.

Predict fatigue life in solder joint using Darveaux method

This App calculates LCF/TMF life (based on BAM damage model) of a component operating at high temperature changes in its operational time. . The life is calculated based on accumulated damage.

Post processing tool based on IIW recommendations to evaluate fatigue according to Nominal, Hot-Spot, Effective Notch and Linearized stress method. Load cases from single step, load case combination or load case scanning. Mean stress correction according to Goodman, Soderberg, Gerber and ASME Elliptical. Cumulative damage from several load cases. S-N curves from IIW, DNV GL RP-C203, and Eurocode 3.

Expose eXtended Finite Element Method (XFEM) quasi-static and fatigue crack growth solver capabilities in Mechanical

Display results from nCode in Mechanical [Contains source code]